The RunTru A951X040BU3SA is a 40,000 BTU, 96% AFUE furnace with a upflow/horizontal configuration and single-stage heating. A multi-speed ECM blower rated at 3.0 tons moves air through the system, and the cabinet is listed at 17.5 inches wide, 34 inches high, and 28.75 inches deep. These figures give HVAC professionals a clear basis for comparing this 96% AFUE furnace with other heating equipment on the project list.
BTU, or British Thermal Unit, ratings are a standard way to describe and compare furnace capacity. The RunTru A951X040BU3SA is rated at 40,000 BTU, also listed as 40 MBTU. Compare this figure with the heating requirements for your project.
AFUE, or Annual Fuel Utilization Efficiency, measures how much of the fuel energy a furnace turns into usable heat over a typical year. A higher number indicates greater efficiency. This furnace carries a 96% AFUE rating.
Single-stage, or 1-stage, heating equipment runs at one fixed output level. It turns on at full output when heat is needed and shuts off once the thermostat setting is reached.
This furnace is listed for upflow installation as well as horizontal left or right orientation. In an upflow setup, air enters at the bottom and leaves through the top. Horizontal orientation turns the furnace on its side so air moves left or right, which can help when vertical space is limited.
ECM stands for electronically commutated motor. This furnace uses a multi-speed ECM blower, which means the blower can be set to different speeds. The blower is rated at 3.0 tons, so confirm that this rating fits the cooling equipment and duct design planned for the system.
The cabinet is listed at 17.5 inches wide, 34 inches high, and 28.75 inches deep. Use these measurements to plan for placement, access, and clearances.
Before ordering, confirm that the part number, BTU rating, AFUE, staging, airflow configuration, blower size, and cabinet dimensions match your system plans.


WE SHIP NATIONWIDE ACROSS THE UNITED STATES AND CANADA. SPEAK TO AN EXPERT: 708-400-7000
