YORK YC618E2S11 1.5 TON 16 SEER2, R454B AC, 1-STAGE, 208/230-1-60
Share
SKU YC618E2S11
$2,395.00
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
YORK YC618E2S11 1.5 TON 16 SEER2, R454B AC, 1-STAGE, 208/230-1-60
Share
Product Details
Brand: YORK
Tonnage: 1.5
Condition: New
System Type: Split
Equipment Type: AC
Refrigerant Type: R-454B
Cabinet Width: 29.25
Cabinet Height: 36.25
Cabinet Depth: 29.25
BTU: 18,000
SEER2: 16
Stage: 1-Stage
YORK 1.5 Ton 16 SEER2 R-454B Single-Stage Split System Air Conditioner
Overview
The YORK YC618E2S11 is a 1.5 ton split system air conditioner from the YORK LX Series YC6 line, rated at 16 SEER2 and using R-454B refrigerant. This single-stage AC runs on 208/230 volt, single-phase, 60 Hz power and uses a 1-stage rotary compressor with an ECM outdoor fan motor. Its cabinet measures 29.25 inches wide, 36.25 inches high, and 29.25 inches deep. With capacity, efficiency, refrigerant, and staging all clearly listed, this YORK air conditioner is straightforward to evaluate against the requirements of your split system.
Quick Facts
- 1.5 ton (18000 BTU nominal), 16 SEER2 split system air conditioner
- YORK part number YC618E2S11
- R-454B refrigerant
- Single stage (1-Stage) operation, 1-stage rotary compressor
- ECM outdoor fan motor
- 208/230 V, 1-phase, 60 Hz
- Cabinet: 29.25 inches W x 36.25 inches H x 29.25 inches D
1.5 Tons
Tonnage describes an air conditioner's cooling capacity, and the YORK YC618E2S11 is rated at a nominal 1.5 tons (18000 BTU). In a split system, cooling equipment is divided between separate indoor and outdoor sections, so the matching indoor coil, furnace, or air handler should be selected and verified separately.
16 SEER2
SEER2 is the current version of the Seasonal Energy Efficiency Ratio. It compares cooling output to the energy used over a typical cooling season, using updated test procedures that better reflect installed conditions. A higher number indicates greater efficiency. This air conditioner is part of YORK's 16+ SEER2 product line, which meets the regional minimum efficiency in all regions of the United States. Actual system ratings depend on the matched indoor unit.
R-454B Refrigerant
This YORK air conditioner uses R-454B refrigerant. Refrigerant type is a key match point in any split system, so confirm that the rest of the system design and the service equipment used on the job are set up for R-454B. The liquid line filter-drier ships loose for field installation, and the unit is factory charged for a 15 ft line set.
Single Stage
Single-stage, or 1-stage, equipment runs at one fixed capacity level. It turns on at full output when cooling is needed and shuts off once the thermostat setting is reached.
Refrigerant Connections
Field-installed refrigerant piping is a 3/8 inch liquid line and a 3/4 inch vapor line.
Cabinet Dimensions
The cabinet is listed at 29.25 inches wide, 36.25 inches high, and 29.25 inches deep. Use these measurements to plan for placement, access, and clearances.
Check the model number, 1.5 ton capacity, 16 SEER2 rating, R-454B refrigerant, single-stage operation, electrical requirements, and cabinet dimensions against your project requirements before placing your order.
