YORK PHSSC2K4777151 80,000 BTU 80% AFUE TWO-STAGE MULTI-POSITION GAS FURNACE, LOW NOX, 17.5" WIDE (SCRATCH & DENT)
Share
SKU PHSSC2K4777151
$1,800.00
1 available
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
YORK PHSSC2K4777151 80,000 BTU 80% AFUE TWO-STAGE MULTI-POSITION GAS FURNACE, LOW NOX, 17.5" WIDE (SCRATCH & DENT)
Share
Product Details
Brand: YORK
Condition: Scratch & Dent
System Type: Gas Heating
Equipment Type: Gas Furnace
Flow Type/Direction: Multi-Position
Cabinet Width: 17.5
Cabinet Height: 33
Cabinet Depth: 29.5
BTU: 80,000
AFUE (Efficiency): 0.8
Stage: Two Stage
YORK 80,000 BTU 80% AFUE Two-Stage Multi-Position Low NOx Gas Furnace (Scratch and Dent)
Overview
The YORK Y82E080B12LMPS1 is a Y82E two-stage gas furnace with a multi-position design for upflow, downflow, or horizontal left or right installation. YORK lists it at 80,000 BTU/h input, 80% AFUE, a standard ECM blower rated at 1200 CFM (3.0 ton), and a 17.5 inch wide cabinet. This model is also a Low NOx version. This unit is sold as scratch and dent, meaning it has cosmetic damage to the cabinet.
Quick Facts
- Two-stage gas furnace, multi-position
- YORK model number Y82E080B12LMPS1
- Input: 80,000 BTU/h
- AFUE: 80%
- Standard ECM blower, 1200 CFM (3.0 ton)
- Two-stage gas valve (low and high fire)
- Low NOx
- Dimensions: 33 inches H x 17.5 inches W x 29.5 inches D
- Condition: scratch and dent
- Full manufacturer's warranty with registration
Scratch and Dent
This unit is offered as scratch and dent. It may show cosmetic marks or dents on the cabinet from shipping or handling. Contact us with any questions about the condition of this specific unit.
Manufacturer's Warranty
This unit comes with the full manufacturer's warranty when it is registered with the manufacturer.
Two-Stage Heating
The two-stage gas valve runs on low fire for most heating calls and switches to high fire on the coldest days, which helps reduce temperature swings.
Standard ECM Blower
ECM stands for electronically commutated motor. A standard ECM blower runs at selectable fixed speeds and uses less power than a conventional PSC motor. The blower is rated at 1200 CFM (3.0 ton), so confirm that this rating fits the cooling equipment and duct design planned for the system.
Low NOx
This Low NOx model is built to produce lower nitrogen oxide emissions, which is required in some regions. Check local code requirements for your area.
Fuel
This furnace is set up for natural gas. Confirm the fuel type and gas supply before ordering; an LP conversion kit is required for propane.
Before ordering, verify the model number, input rating, fuel type, venting, and airflow against your project requirements.
