YORK JHETC42FBAS2N1 3.5 TON R410A AIR HANDLER, STD ECM, MULTI-POSITION, FACTORY TXV, 208/230-1-60

YORK 3.5 Ton R-410A Multi-Position Air Handler with Standard ECM Blower

Overview

The YORK JHETC42FBAS2N1 is a 3.5 ton single-piece air handler from the YORK LX Series JHET line, built for R-410A split-system air conditioners and heat pumps. It has a standard ECM blower rated at 1400 CFM, a factory installed TXV, and is two-stage capable, so it can be paired with single-stage or two-stage outdoor units. The cabinet is 21 inches wide, 57 inches high, and 21.44 inches deep, and it installs upflow, downflow, horizontal left, or horizontal right.

Quick Facts

• 3.5 ton single-piece air handler for cooling and heat pump systems
• YORK part number JHETC42FBAS2N1
• R-410A refrigerant, factory installed TXV
• Standard ECM blower, 1400 CFM nominal airflow
• Two-stage capable
• Multi-position: upflow, downflow, horizontal left or right
• 208/230 V, 1-phase, 60 Hz
• Cabinet: 21 inches W x 57 inches H x 21.44 inches D

3.5 Tons

An air handler's tonnage shows the size of system it is designed to pair with. The YORK JHETC42FBAS2N1 is a nominal 3.5 ton unit with a 3-row, 24 x 14 (3R-24-14) aluminum coil. Confirm the match with the outdoor unit before ordering.

R-410A Refrigerant

This air handler is built for R-410A refrigerant and ships with a factory installed TXV. Refrigerant type is a key match point in any split system, so confirm that the outdoor unit and the service equipment used on the job are set up for R-410A. It is not intended for R-454B systems.

Standard ECM Blower

The standard ECM blower motor moves air more efficiently than a traditional PSC motor. This air handler is rated for 1400 CFM nominal airflow and is two-stage capable, so it works with both single-stage and two-stage outdoor equipment.

Multi-Position Installation

The cabinet ships ready for upflow or horizontal left installation and can be set up for downflow or horizontal right. That makes it a fit for closets, utility rooms, attics, crawl spaces, and basements.

Electric Heat Option

Electric heat is not included. YORK 8HK series electric heat kits can be field installed when supplemental or primary electric heat is needed.

Refrigerant Connections

Sweat refrigerant connections are a 3/8 inch liquid line and a 7/8 inch vapor line.

Cabinet Dimensions

The cabinet is listed at 21 inches wide, 57 inches high, and 21.44 inches deep. Use these measurements to plan for placement, access, and clearances.

Check the model number, 3.5 ton capacity, R-410A refrigerant, blower type, electrical requirements, and cabinet dimensions against your project requirements before placing your order.